Micro-Finish Scratch Remover
$8.99 Regular price Save $-8.99Voodoo Ride Scratch Remover is a premium formulation that is clear-coat safe and removes light scratches, fine swirl marks, oxidation, blemishes and imperfections. It is easy to use and will leave a deep, mirror-like gloss finish, free of surface distortions whether applied by hand or machine buffer.
- Removes light scratches, swirl marks, and oxidization
- Leaves a shiny, protectively sealed surface
- Safe for clear-coated surfaces
- Great for cleaning up “clouded” headlamps
NET WT. 7.5 OZ. (222 ML)
WHAT YOU CAN EXPECT WHEN USING THIS PRODUCT?
It’s a rough and tumble world out there and scratches happen. Luckily there’s Voodoo Ride Micro-Finish Scratch Remover to rub out light scratches, swirl marks, paint oxidization and other minor blemishes —that are not so minor when you’re looking for showroom perfection. Just wipe it on and rub it off for a clean, scratch-free and protectively-sealed, high-gloss finish. Safe-for clear-coated surfaces. Unknown secret: Voodoo Ride Micro-Finish Scratch Remover will buff out oxidation on aged, fogged up headlamps, fog lights, brake lights, reverse lights, turn signals, to a crystal clear, brand new finish. Try it!
DIRECTIONS
Wash surface prior to use. Spot-test on a small area before using. Apply a small, even amount of scratch remover to surface with a clean, dry soft cloth or microfiber towel. Use in small sections buffing affected area until product dissipates. Repeat process if needed. Wipe excess product from surface with clean cloth. Never use on unpainted vinyl, rubber, anodized metals or decals.
PRODUCT WARNINGS
CAUTION: COMBUSTIBLE. Keep away from heat, sparks and open flames. KEEP OUT OF REACH OF CHILDREN. FIRST AID TREATMENT: If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water. If breathed in, move person into fresh air.
It’s a rough and tumble world out there and scratches happen. Luckily there’s Voodoo Ride Micro-Finish Scratch Remover to rub out light scratches, swirl marks, paint oxidization and other minor blemishes —that are not so minor when you’re looking for showroom perfection. Just wipe it on and rub it off for a clean, scratch-free and protectively-sealed, high-gloss finish. Safe-for clear-coated surfaces. Unknown secret: Voodoo Ride Micro-Finish Scratch Remover will buff out oxidation on aged, fogged up headlamps, fog lights, brake lights, reverse lights, turn signals, to a crystal clear, brand new finish. Try it!
DIRECTIONS
Wash surface prior to use. Spot-test on a small area before using. Apply a small, even amount of scratch remover to surface with a clean, dry soft cloth or microfiber towel. Use in small sections buffing affected area until product dissipates. Repeat process if needed. Wipe excess product from surface with clean cloth. Never use on unpainted vinyl, rubber, anodized metals or decals.
PRODUCT WARNINGS
CAUTION: COMBUSTIBLE. Keep away from heat, sparks and open flames. KEEP OUT OF REACH OF CHILDREN. FIRST AID TREATMENT: If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water. If breathed in, move person into fresh air.
| CHEMICAL NAME | CAS NUMBER | FUNCTION | REGULATORY NOTES |
| D.I. WATER | 7732-18-5 | ||
| ALUMINUM OX 877D | ALUMINUM OXIDE - 1344-28-1 FORMALDEHYDE - 50-00-0 | ABRASIVE | PROP 65 |
| DRAKESOL 165AT | DISTILLATES(PETROLEUM),ACID-TREATED LIGHT - 64742-14-9 | SOLVENT | |
| IPA 99 | ISOPROPYL ALCOHOL - 67-63-0 | SOLVENT | |
| XIAMETER PMX-0345 | DECAMETHYLCYCLOPENT ASILOXANE - 541-02-6 | SILICONE | |
| MINERAL SPIRITS 66 | DISTILLATES,HYDROTREATED LIGHT - 67742-47-8 BENZENE - 71-43-2 | SOLVENT | PROP 65 |
| XIAMETER PMX-200(100) | SILOXANES AND SILICONS, DIMETHYL - 63148-62-9 | SILICONE | |
| KAOPOLITE 1152 | KAOUN - 92704-41-1 TITANIUM DIOXIDE - 13463-67-7 | ABRASIVE | PROP 65 |
| ACRYSOL TT615 | MIXTURE - NO CAS # ETHYL ACRYLATE - 140-88-5 | THICKENING AGENT | PROP 65 |
| CALUMET 400/500 | DISTILLATES(PETROLEUM), HYDROTREATED LIGHT - 64742-47-8 | SOLVENT | |
| WHITE MINERAL OIL | WHITE MINERAL OIL(PETROLEUM) - 8042-47-5 | OIL | |
| GLYCERINE 99 | GLYCERIN - 56-81-5 | EMULSIFIER | |
| TEA 99 | TRIETHANOLAMINE - 102-72-6 DIETHANOLAMINE - 111-42-2 | ALKALI BUILDER | PROP 65 |
| TOMADOL 1-5 | POLY(OXY-1,2-ETHANADIYL) - 34398-01-1 | SURFACTANT | |
| NUOSEPT 498G | 1,2 BENZISOTHIAZOL-3(2H) - 2634-33-5 1,4 DIOXANE - 123-91-1 ETHYLENE OXIDE - 75-21-8 | PRESERVATIVE | PROP 65 |
CAN I DO THIS BY HAND OR WOULD I NEED A MACHINE?
You can definitely do it by hand for small scratches and light swirl marks. For larger areas, a machine buffer would definitely speed things up.
WILL THIS PRODUCT REMOVE SCRATCHES ON PLASTIC?
It works on well on removing light scratches off of plastic surfaces like headlights and taillights. Simply rub some on and buff it off.
You can definitely do it by hand for small scratches and light swirl marks. For larger areas, a machine buffer would definitely speed things up.
WILL THIS PRODUCT REMOVE SCRATCHES ON PLASTIC?
It works on well on removing light scratches off of plastic surfaces like headlights and taillights. Simply rub some on and buff it off.